Products
90 degree curve cone roller conveyor
Turning curve roller installation:
O-belt rollers
sprocket rollers
plain fixed rollers
Cone Roller ine groove
Feature
Iyo 1012 yakatevedzana yakapetwa kaviri "O" groove yakatevedzana ma rollers anoshandiswa seyakakosha chimiro, uye epurasitiki taper maoko anowedzerwa kuona iyo "O" bhandi dhiraivha kushandura basa.
Inokodzera kutakura zvinhu zvakareruka.
PVC Cone Sleeve Roller, nekuwedzera conical sleeve (PVC) kune yakajairwa roller, marudzi akasiyana-siyana ekushandura musanganisi anogona kuitwa kuti aone curved kufambisa.Standard taper ndeye 3.6 °, yakakosha taper haigone kugadziridzwa.
Simbi cone roll, isiri-yakajairwa saizi, yakafara tembiricha renji, inogona kugadzirwa simbi cone roll.3.6 ° yakajairika taper inogona kushandiswa, uye mamwe matepi anogona zvakare kugadzirwa.
General Data
| Kutakura mutoro | Single zvinhu ≤30KG |
| Maximum kumhanya | 0.5m/s |
| Tembiricha range | -5℃~40°C |
Zvishandiso
| Bearing housing | Plastic carbon steel components |
| Kuvhara end cap | Plastiki zvikamu |
| Call | Carbon steel |
| Roller pamusoro | Plastiki |
Chimiro
| Taper Sleeve Parameter Tafura | ||
| Taper sleeve urefu (WT) | Taper Sleeve Diameter (D1) | Taper Sleeve Diameter (D2) |
| 300 | Φ56 | Φ74.9 |
| 350 | Φ52.9 | Φ74.9 |
| 400 | Φ56 | Φ81.1 |
| 450 | Φ52.9 | Φ81.1 |
| 500 | Φ56 | Φ87.4 |
| 550 | Φ52.9 | Φ87.4 |
| 600 | Φ56 | Φ93.7 |
| 650 | Φ52.9 | Φ93.7 |
| 700 | Φ56 | Φ100 |
| 750 | Φ52.9 | Φ100 |
| 800 | Φ56 | Φ106.3 |
| 850 | Φ52.9 | Φ106.3 |
Sarudzo Parameter Tafura
| Tube Dia | Tube ukobvu | Shaft Dia | Maximum load | Bracket width | Kutsvaga nhanho | Shaft Length L | Shaft Length L | Material | Sarudzo muenzaniso | Zvinodiwa zvakakosha | |||
| D | t | d | BF | ( thread yechikadzi) | Spring pressure | Simbi zincplated | Simbi isina ngura | Aluminium | PVC | Kunze dhayamita 50mm Shaft dhayamita 11mm | Taper sleeve kureba 300mm | ||
| AO | B1 | CO | DO | Roller pamusoro kureba 450mm | |||||||||
| Φ50 | 1.5 | 11hex Φ8/12/15 | 50KG | W+10 | W+9 | W+10 | W+31 | ✓ | ✓ | Stainless simbi 201, Mukadzi shinda 1002C.5011.450.0.00 | |||
MashokoNzvimbo yekumanikidza groove iri pamagumo edhiramu, uye chete Φ50 machubhu.A plastiki taper sleeve inogona kuwedzerwa kugadzirisa roller inotenderera.
