Ngwaahịa
90 degrees curve cone roller conveyor
Nrụnye ihe mkpuchi rola na-atụgharị:
O-belt rollers
sprocket rollers
rollers kwụ ọtọ
Cone Roller nwere oghere
Njirimara
A na-eji usoro 1012 okpukpu abụọ nke “O” groove series rollers dị ka ihe bụ isi, a na-agbakwunyekwa aka uwe plastik iji ghọta ọrụ ntụgharị “O” belt mbanye.
Kwesịrị ekwesị maka ibufe ihe ibu dị mfe.
PVC Cone Sleeve Roller, site n'ịgbakwụnye a conical aka uwe (PVC) na omenala rola, ụdị dị iche iche nke ịtụgharị mixers nwere ike na-aghọta curved ibufe. Standard taper bụ 3.6°, pụrụ iche taper enweghị ike ahaziri.
Mpempe akwụkwọ mpịakọta ígwè, nha na-abụghị ọkọlọtọ, oke okpomọkụ, enwere ike ịhazi mpịakọta ígwè cone. Enwere ike iji taper ọkọlọtọ 3.6°, yana tapers ndị ọzọ nwekwara ike ịhazi ya.
Data izugbe
| Na-ebufe ibu | Otu ihe ≤30KG |
| Ọsọ kacha | 0.5m / s |
| Oke okpomọkụ | -5 ℃ ~ 40 ℃ |
Akụrụngwa
| Ime ụlọ | Plastic carbon ígwè components |
| Okpu ngwụcha akara | Ngwa plastik |
| Kpọọ | Carbon ígwè |
| Roller elu | Plastic |
Nhazi
| Tebụl Parameter Sleeve Taper | ||
| Ogologo aka uwe ogologo (WT) | Dayameta Sleeve Taper (D1) | Dayameta Sleeve Taper (D2) |
| 300 | Φ56 | Φ74.9 |
| 350 | Φ52.9 | Φ74.9 |
| 400 | Φ56 | Φ81.1 |
| 450 | Φ52.9 | Φ81.1 |
| 500 | Φ56 | Φ87,4 |
| 550 | Φ52.9 | Φ87,4 |
| 600 | Φ56 | Φ93.7 |
| 650 | Φ52.9 | Φ93.7 |
| 700 | Φ56 | Φ100 |
| 750 | Φ52.9 | Φ100 |
| 800 | Φ56 | Φ106.3 |
| 850 | Φ52.9 | Φ106.3 |
Okpokoro Oke Nhọrọ
| Tube Dia | Ọkpụrụkpụ tube | Shaft Dia | Ibu kacha | Obosara mgbodo | Ịchọta nzọụkwụ | Ogologo Shaft L | Ogologo Shaft L | Ihe onwunwe | Ihe atụ nhọrọ | Ihe achọrọ pụrụ iche | |||
| D | t | d | BF | (Eri nwanyị) | Nrụgide mmiri | Nchara zincplated | Igwe anaghị agba nchara | Aluminom | PVC | Mpụga dayameta 50mm Shaft dayameta 11mm | Ogologo aka uwe taper 300mm | ||
| AO | B1 | CO | DO | Roller elu ogologo 450mm | |||||||||
| Φ50 | 1.5 | 11hex Φ8/12/15 | 50KG | W+10 | W+9 | W+10 | W+31 | ✓ | ✓ | Igwe anaghị agba nchara 201, eri nwanyị 1002C.5011.450.0.00 | |||
Okwu:Ọnọdụ nkeuzo nsogbubụ na njedebe nke drum, na naanị maka Φ50 tubes.Ihe mkpuchi plastikEnwere ike ịgbakwunye aka uwe iji hazie ihe ntụgharị ntụgharị.
